Torque Boxes |
What was left of the old torque box |
The new box as recieved |
The new box was cut open for painting ,and for access for welding during installation |
This corner had to be trimmed at an angle so it would not interfear with framerail |
While fitting the new box into position it was discovered the bent flange for the
framerail welds was off ran off 1/8" |
Top was fitted back in place and welded. Slight trimming was needed because of the framerail extention being slightly off. (To match factory positioning) |
Sheetmetal prep and issues |
The garden where we get our iron "Bill , pick me another torque box" |