Tool I made to remove panel skins |
This is a tool I made to remove panel skins, so that the rust hideing under the panel could be removed and then reassembled. Eastwood
company sells one for about $80 but I am to cheap to want to spend that
kind of money. I used 1" angle welded to make a C channel with a pipe for a handle.
I used a cold chisel and a ground screw driver as the other part to work
the panel open. I drilled a series of holes at different locations to get the best
prying angle at the fold. This was a spare trunk lid that I successfully pryed
the skin off exposing all the rust. There was no visable rust before i began.
It was all hidden away underneath. |