Body repair page # 6 |
After the front was completely media blasted, Bill cleans up all the loose
debris that was left. |
The metal was first treated in a solution of iron etch 6878 from Martin Senour then
Triple Etch 6877also from Martin Senour. They are carried at the local NAPA
parts store and they have a terrific web site. See table of contents for Paint
information and links page for web address for Martin Senour |
This is the right shock tower after the Triple Etch is applied. |
This is a shot of the firewall after etching also. |
After the etch and a wash and a very thorough dry the Martin Senour Epoxy Primer
is applied to all surfaces. I used 5120 low voc grey primer catalyzed with 5123
catalyst |
The engine compartment after painting. |
Right shocktower after painting |
Left shocktower after painting |